I've had my 10/22 for a few months now. I've got the factory model that came with the BX trigger, so that was a bit of a money saver out of the gate! Other than that it's got a silencerco sparrow and vortex crossfire ii. Also got the sling mounts today and put them on my Blue Force sling from my AR15, so now I can swap the sling back and forth between the two guns. Pretty neat!

Never heard of the barrel brand. Does anyone have one ?

I didnt do it perfectly just wanted to run subs a little better started with 1500 then 2000. The first photo i already started but that was what it looked like before i started and it does cycle smother

People say these are trash. No they're not. With just a little TLC and a few diy modifications you got a really nice little rig.

I’ve been thinking it’s can time, before I go wrenching on this can anybody tell me if there’s a factory thread underneath this brake thing, might be a silly question I know, I’ve had this gun for years as it was one of my first guns as a teenager, recently swapped out the ATI tactical bullshit stock for a magpul and was hoping to make it a little more quiet

i have 2 LVTs -- the hogue and the stainless talo edition that cost me $600😬.

after failng to sell off the blued LVT on my state gun forum, im gonna keep it and switch the stocks.

whats the best way to get a nice wood stock (or better??) for one of these? the barrel tapers from 0.920 to 0.7xx, so a bull barrel stock wouldnt fit properly toward the end of the barrel.

the hogue over-molded barrel isnt for me, but i otherwise love the rifle, barrel, trigger, and threaded feature for the thwip, thwip, thwip option.

Has anyone here refinish their original 10/22 stock with Birchwood Casey stain kit? If so how did it turn out?

Hey guys,

Newbie Ruger owner here and relatively new to firearms although I've been in the military (long time ago) and also carried a shotgun for work in northern British Columbia and Alberta. I'm appreciating firearms now for more than simply work purposes, getting into them as more of a hobby and as a single mom wanting to feel a little more independent.

Here's a pic of my new Ruger with the archangel conversion kit. Now I need a scope but shopping around for one is overwhelming, I really don't know what to look for. Any suggestions for a modest budget?

Thanks, you guys rock 👊

Follow up from: https://www.reddit.com/r/1022/s/309BocGKNZ

I gave my gun a thorough cleaning and tried a bunch of different ammo and magazine combinations.

The gun cycled fine with the suppressor off, but ran into issues with the suppressor on. I'm assuming the spring is too strong for the trigger to reset, so I purchased the Firefly 2 bolt.

My question is is there any concern with running standard ammo with the reduced power spring installed?

I sold my last 10/22 a few years ago but missed cheap range days! My LGS had a lightly used carbon model that I just couldn't resist.

It's a pre-2026 model so doesn't have the cleaning rod port, so I'm going to drill that out, and I had an auto bolt release in my parts box. I also had a trigger pack that I had installed the Volquartsen kit into, so I popped that in too.

I shot 150 rounds of Federal Auto match and 50 CCI SVs with not a single failure, and the SVs were super quiet with the Mask suppressor.

It's great to be back in the 10//22 fold!

So I have a 10/22 takedown and a charger takedown. I got the itch to sbr one of them. Which one would you go with and why?

I got the rifle about a year ago and have put around 3k rounds through it so far. I’ve been using CLP every few hundred rounds. Just noticed this today and I’m not sure if it’s rust or something else. Did I mess something up with my cleaning?

I’m supposed to attend an Appleseed next weekend, so I’m wondering if I even have enough time to order a replacement if I need one.

Just got my 10/22 SBR form 1 approved and am looking to change out my barrel to a 10.5” and run with my OCL Ti 22 suppressor.

Or should I just get an Angstad Arms Vanquish 22 barrel in either 18.5” or 12” ?

Use case is just plinking with mini-mags or other bulk ammo.

I'm looking to upgrade my trigger, and trying to see what my options are other then the kidd single stage or two stage complete trigger. Anyone running anything other than a kid that they're really happy with. I'm looking for super light for bench rest.

Thanks.

I recently picked up the Magnum Research Switchbolt and they have a Twitter group that is loosely based on the Ruger 10/22 design but includes a bunch of small differences. The flush mounted mag release does not work for me, I need something that is a little bit easier to access during competition use where I cannot break the 180 and was heavily considering the factory Ruger extended mag release that hugs the shape of the trigger guard (pictured above) but when examining mine closer I realized I have a huge undercut in front of the trigger and that will not work so I am looking for suggestions.

Not sure if a push or pull option would be best for my application but I definitely don't want something that is going to stick out like a sore thumb and look awkward especially now that I realize how far back the trigger guard is cut from a factory shape. Any suggestion on where I should look for something that will be highly functional and not look awkward?

I saw a post today asking about the backpacker with an 8" barrel. I wanted to share mine!

Time for a new extractor, any suggestions or is OEM good enough? Also need to make another folding stock to throw on this bad boy.

The Charger SBR with wayyyyy too much shit on it :)

Anyway we can get a thread tracking actually good sale pricing? We’re a narrow community, with a broad range of parts and builds. r/gundeals is great, but it’s largely a pistol and AR sub. Not everyone has a massive budget for builds, let’s recognize that.

Where are you finding the best deals? Have you seen any prices lately that have made you say, “if only I didn’t buy that last week, what a great price!” Any websites with holiday weekend deals that have caught your eye? What specific part are you looking at?

Howdy. Quick question with hopefully an easy answer. For my 10/22 I’m using a sparrow can on a ballistic advantage barrel. My issue is that I have a major inconsistent poi shifts when I put it on, the base of the can doesn’t meet the shoulder of the barrel, if I tighten it until it’s snug I have about 3” left impact shift; if I back it off a bit I have minimal shift. I know about shims to time a muzzle device but I’m not sure if that’s meant for repetitive on and off uses, could I use washers or does someone make a reusable shim, need about 1/8 of an inch to contact the shoulder.